- Production capacity, max. 4000
- Blown bottle volume, l. 0,25 – 2
- Bottle neck diameter, mm 28 and 38
- Number of places in the mold, pcs. 2
- Maximum bottle diameter, mm 105
- Maximum bottle height with neck, mm 350
Automatic machine is designed for the production of PET-bottles from heated preforms by stretching and two-stage blow molding in a double mold.
The machine is equipped with pneumatic equipment made by leading manufacturers such as “FESTO”, “AirCom”, and “OMRON” controller and electronics.
| Parameter | Unit of measure | Parameter value for modification | |
| Bottle neck diameter | mm | 28 | 38 |
| Production capacity*, max. | bottles/h | 4000** | 4000** |
| – bottle capacity, | l | 1,5 | 1,0 |
| Blown bottle volume | l | 0,25-2,0 | 0,25-1,5 |
| Number of places in the mold | pcs. | 2 | 2 |
| Maximum bottle diameter | mm | 105 | 105 |
| Maximum bottle height with neck | mm | 350 | 350 |
| Pre-blowing pressure, max. | MPa | 1,0 | 1,0 |
| Blowing pressure | MPa | 4,0 | 4,0 |
| Control pressure | MPa | 0,8 | 0,8 |
| Total compressed air consumption, including: | m3/min | 7,0 | 7,0 |
| Coolant temperature | оС | 6-10 | 6-10 |
| Coolant flow rate | m3/h | 1,5 | 1,5 |
| Coolant pressure | MPa | 0,3 | 0,3 |
| Cooling capacity of the cooling unit | kW | 17 | 17 |
| Number of heating modules | pcs. | 32 | 32 |
| Number of heating zones | pcs. | 8 | 8 |
| Power consumption | kW | 20,0 | 20,0 |
| Supply voltage | V | 380 | 380 |
| Overall dimensions: | |||
| – length | mm | 3300 | |
| – width | mm | 2205 | |
| – height | mm | 2450 | |
| Total weight | kg | 4000 | 4000 |
* Depending on the configuration and volume of blown PET bottles
** The manufacturer does not guarantee the established performance of the equipment when using molds from other manufacturers, non-compliance with the requirements for compressed air, cooling water, electrical connections, and industrial premise
